Customisation function Outlander III (2013MY)

By operating the M.U.T.-III ETACS system, the following functions can be customised. The programmed information is held even when the battery is disconnected.

Adjustment
item (M.U.T.-III
display)
Adjustment item Adjusting content
(M.U.T.-III display)
Adjusting content
Turn power source Adjustment of turn-signal lamp operation condition ACC or IG1 Operable with ACC or ON position
IG1 Operable with ON position (initial condition)
Comfort flasher With/without comfort flasher function Disable No function
Enable With function (initial condition)
Hazard answer back Adjustment of the number of keyless hazard warning lamp answer back flashes Lock:1, Unlock:2 LOCK: Flashes once, UNLOCK: Flashes twice (initial condition)
Lock:1, Unlock:0 LOCK: Flashes once, UNLOCK: No flash
Lock:0, Unlock:2 LOCK: No flash, UNLOCK: Flash twice
Lock:2, Unlock:1 LOCK: Flash twice, UNLOCK: Flash once
Lock:2, Unlock:0 LOCK: Flash twice, UNLOCK: No flash
Lock:0, Unlock:1 LOCK: No flash, UNLOCK: Flash once
Lock:0, Unlock:0 No function
Front wiper operation Adjustment of the intermittent windshield wiper operation <vehicles without lighting control sensor> Normal INT Intermittent wiper interval is fixed to 4 seconds.
Variable INT Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (initial condition).
Adjustment of the intermittent windshield wiper operation <vehicles with lighting control sensor> Normal INT Intermittent wiper interval is fixed to 4 seconds.
Variable INT Intermittent wiper interval is calculated only by the wiper volume control.
Speed Sensitive Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed.
Rain Sensitive Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (initial condition).
Front/rear wiper washer Disabling or enabling washer-linked wiper function Only Washer No function
Washer & Wiper With function: Without delayed finishing wipe function <Initial condition>
With after wipe With function: With delayed finishing wipe function
Intermittent time of rear wiper Adjustment of rear wiper interval 0 sec. No wiper interval
4 sec. 4 seconds
8 sec. 8 seconds (initial condition)
16 sec. 16 seconds
Rear wiper Low speed mode Disabling or enabling rear wiper continuous operation Disable No function
Enable With function (initial condition)
Auto fold mirror Electric folding door mirror automatic unfolding function <vehicles with electric retractable remote controlled door mirrors> Not Auto No synchronised operation
Open Vehicle SPD Vehicle speed-dependent operation
Open/Close by IG Ignition switch linked operation
OPN/CLS Keyless Keyless entry linked operation (initial condition)
Sensitivity for auto lamp Lighting control sensor sensitivity (illumination intensity) <vehicles with lighting control sensor> Level 1 bright High ambient brightness
Level 2 bright Standard ambient brightness (initial condition)
Level 3 Low ambient brightness
Level 4 dark Low-low ambient brightness
Room lamp delay timer with door Adjustment of interior lamp delay shutdown time 0 sec. 0 second (no delay shutdown time)
7.5 sec. 7.5 seconds
15 sec. 15 seconds (initial condition)
30 sec. 30 seconds
60 sec. 60 seconds
120 sec. 120 seconds
180 sec. 180 seconds
Head lamp auto cut customise Adjustment of headlamp automatic shutdown function Disable No function
Enable (B-spec.) With function (initial condition)
Interior lamp auto cut timer Adjustment of interior lamp automatic shutdown function operation time Disable No function
3 min 3 minutes
30 min 30 minutes (initial condition)
60 min 60 minutes
Comfort flasher switch time Switch operation time to activate the comfort flasher function Normal 0.4 second (initial condition)
Long 0.8 second
Intelligent/Comfort washer With/without Comfort washer function Disable No function (Initial condition)
Enable With function
Auto door unlock Adjustment of the auto door unlock function Disable Without function (initial condition)
Always (P pos) With function: Operates when the shift lever or the selector lever is moved to the P position.
Always(Lock pos) With function: Operates when the ignition switch is moved to the LOCK (OFF)
position.
Door unlock mode Adjustment of power door locks with selective unlocking All Doors Unlock Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors (initial condition).
Dr Door Unlock With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver's door only, and the second unlock operation within 2 seconds after that unlocks all doors.
Timer lock timer Timer lock period adjustment 30 sec. 30 seconds (initial condition)
60 sec. 60 seconds
120 sec. 120 seconds
180 sec. 180 seconds
Multi mode Multi-mode keyless entry function customisation <Vehicles with electric retractable remote controlled door mirrors> Disable No function
D/M: O&C Door mirror fold/unfold operation only (initial condition)
Duration of horn chirp Horn sounding time during horn answer back Short 0.01 second (initial condition)
Long 0.02 second
Rear wiper(linked reverse gear) Adjustment of automatic rear window wiper operation with reverse gear engaged Enable(R wip.ON) Operates only when the rear wiper switch is ON.
Enable(R/F wip.) Operates only when the front or rear wiper switch is ON (initial condition).
KOS key detect
out from window
With/without KOS key exterior detection function <Vehicles with KOS> Enable No function
Disable With function (initial condition)
KOS feature KOS function adjustment <Vehicles with KOS> Both enable All KOS functions are enabled (initial
condition).
Door Entry enable Only door entry function is enabled.
ENG start enable Only engine starting function is enabled.
Both disable All KOS functions are disabled.
KOS unlock disable time Adjusts the door unlock inhibition period after door lock is activated. <Vehicles with KOS> 0 sec. 0 second
3 sec. 3 seconds (Initial condition)
5 sec. 5 seconds
Remote ENG starter answer back Remote engine starter answer back function adjustment Disable No function (Initial condition)
Enable With function
ACC power auto cut Time to ACC power cut-off when the ignition switch is in the ACC position Disable No function
30 min 30 minutes (initial condition)
60 min 60 minutes
Coming home light Disabling or enabling coming home light function Disable No function
15 sec. The headlamps illuminate for 15 seconds.
30 sec. The headlamps illuminate for 30 seconds. (initial condition)
60 sec. The headlamps illuminate for 60 seconds.
180 sec. The headlamps illuminate for 180 seconds.
Welcome light Disabling or enabling welcome light function Disable No function
Small lamp The tail lamps illuminate. <initial condition>
Head lamp The headlamps illuminate.
Outer buzzer volume Volume adjustment for the KOS outer buzzer <Vehicles with KOS> Volume 1 Quieter than the standard
Volume 2 Standard volume (Initial condition)
Volume 3 Louder than the standard
A/C Recirculation Control With/without the inside/outside air automatic control function Disable No function
Enable With function (Initial condition)
A/C Switch Control With/without A/C automatic control function Disable No function
Enable With function (Initial condition)
A/C Sensible temp. customize Adjusting mean value for temperature setting -2 Decreases the control temperature two degrees than the temperature displayed on the LCD.
-1 Decreases the control temperature one degree than the temperature displayed on the LCD.
0 No change (Initial condition)
1 Increases the control temperature one degree than the temperature displayed on the LCD.
2 Increases the control temperature two degrees than the temperature displayed on the LCD.
FOOT / DEF Air outlet ratio Changes air distribution rate for DEF/FOOT vents during manual operation. Normal D/F2 (Initial condition)
FOOT > DEF D/F1(more to FOOT vent): More air flows through FOOT vents.
FOOT < DEF D/F3(more to DEF vent): More air flows through DEF vents.
FACE / FOOT Air outlet ratio Changes air distribution rate for FACE/FOOT vents during manual operation. Normal B/L2 (Initial condition)
FACE > FOOT B/L1(more to FACE vent): More air flows through FACE vents.
FACE < FOOT B/L3(more to FOOT vent): More air flows through FOOT vents.
Auto Rear Defogger(Engin e Start) When ambient temperature is 3 degree or less, the rear defogger will be turned on automatically. (The rear window defogger has never been activated since the ignition switch was turned on last time) Disable No function (Initial condition)
Enable With function