Customisation function ASX

CUSTOMISATION FUNCTION

By operating the M.U.T.-III ETACS system or MMCS <vehicles for Russia>, the following functions can be customised. The programmed information is held even when the battery is disconnected.

Adjustment item (M.U.T.-III display)

Adjustment item

Adjusting content (M.U.T.-III display)

Adjusting content

ACC power auto cut

Time to ACC power cut-off when the ignition switch is in the ACC position

Disable

No function

30 min

30 minutes (initial condition)

60 min

60 minutes

Turn power source

Adjustment of turn-signal lamp operation condition

ACC or IG1

Operable with ACC or ON position

IG1

Operable with ON position (initial condition)

Comfort flasher

With/without comfort flasher function

Disable

No function

Enable

With function (initial condition)

Comfort flasher switch time

Switch operation time to activate the comfort flasher function

Normal

0.4 second (initial condition)

Long

0.8 second

Hazard answer back

Adjustment of the number of keyless hazard warning lamp answer back flashes

Lock:1, Unlock:2

LOCK: Flashes once, UNLOCK: Flashes twice (initial condition)

Lock:1, Unlock:0

LOCK: Flashes once, UNLOCK: No flash

Lock:0, Unlock:2

LOCK: No flash, UNLOCK: Flash twice

Lock:2, Unlock:1

LOCK: Flash twice, UNLOCK: Flash once

Lock:2, Unlock:0

LOCK: Flash twice, UNLOCK: No flash

Lock:0, Unlock:1

LOCK: No flash, UNLOCK: Flash once

Lock:0, Unlock:0

No function

Front wiper operation

Adjustment of the intermittent windshield wiper operation <Vehicles without lighting control sensor>

Normal INT

Intermittent wiper interval is fixed to 4 seconds.

Variable INT

Intermittent wiper interval is calculated only by the wiper volume control.

Speed Sensitive

Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed (initial condition).

Adjustment of the intermittent windshield wiper operation <Vehicles with lighting control sensor>

Normal INT

Intermittent wiper interval is fixed to 4 seconds.

Variable INT

Intermittent wiper interval is calculated only by the wiper volume control.

Speed Sensitive

Intermittent wiper interval is calculated according to the intermittent wiper volume control and vehicle speed.

Rain Sensitive

Intermittent wiper interval is calculated according to the intermittent wiper volume control and lighting control sensor (initial condition).

Front/rear wiper washer

Disabling or enabling washer-linked wiper function

Only Washer

No function

Washer & Wiper

With function: Without delayed finishing wipe function <Initial condition (vehicles for RUSSIA)>

With after wipe

With function: With delayed finishing wipe function*<Initial condition (except vehicles for RUSSIA)>

note *: Delayed finishing wipe function is available for only front wiper.

Intelligent/Comfort washer

With/without Comfort washer function

Disable

No function <Initial condition (vehicles for RUSSIA)>

Enable

With function <Initial condition (except vehicles for RUSSIA)>

Intermittent time of rear wiper

Adjustment of rear wiper interval

0 sec

No wiper interval

4 sec

4 seconds

8 sec

8 seconds (initial condition)

16 sec

16 seconds

Rear wiper low speed mode

Disabling or enabling rear wiper continuous operation

Disabled

No function

Enabled

With function (initial condition)

Rear wiper(linked reverse gear)

Adjustment of automatic rear window wiper operation with reverse gear engaged

Enable(R wip.ON)

Operates only when the rear wiper switch is ON.

Enable(R/F wip.)

Operates only when the front or rear wiper switch is ON (initial condition).

Auto fold mirror

Electric folding door mirror automatic unfolding function

Not Auto

No synchronised operation

Open Vehicle SPD

Vehicle speed-dependent operation <Initial condition (Vehicles without electric retractable remote controlled door mirrors)>

Open/Close by IG

Ignition switch linked operation

OPN/CLS Keyles

Keyless entry linked operation <Initial condition (Vehicles with electric retractable remote controlled door mirrors)>

Sensitivity for auto lamp

Lighting control sensor sensitivity (illumination intensity) <Vehicles with lighting control sensor>

Level 1 bright

High-high ambient brightness

Level 2 bright

High ambient brightness

Level 3

Standard ambient brightness (initial condition)

Level 4 dark

Low ambient brightness

Level 5 dark

Low-low ambient brightness

Coming home light

Disabling or enabling coming home light function

Disabled

No function

15 sec

The headlamps illuminate for 15 seconds.

30 sec

The headlamps illuminate for 30 seconds. (initial condition)

60 sec

The headlamps illuminate for 60 seconds.

180 sec

The headlamps illuminate for 180 seconds.

Welcome light

Disabling or enabling welcome light function

Disabled

No function <initial condition (Vehicles for RUSSIA)>

Small lamp

The tail lamps and position lamps illuminate. <initial condition (except vehicles for RUSSIA)>

Head lamp

The headlamps illuminate.

Room lamp delay timer with door

Adjustment of interior lamp delay shutdown time

0 sec

0 second (no delay shutdown time)

7.5 sec

7.5 seconds

15 sec

15 seconds (initial condition)

30 sec

30 seconds

60 sec

60 seconds

120 sec

120 seconds

180 sec

180 seconds

Head lamp auto cut customise

Adjustment of headlamp automatic shutdown function

Disable

No function

Enable (B-spec.)

With function (initial condition)

Interior lamp auto cut timer

Adjustment of interior lamp automatic shutdown function operation time

Disable

No function

3 min

3 minutes

30 min

30 minutes (initial condition)

60 min

60 minutes

Door unlock mode

Adjustment of power door locks with selective unlocking <Vehicles without dead lock system>

All Doors Unlock

Without function: The first operation of keyless entry system or unlock operation by KOS unlocks all doors (initial condition).

Dr Door Unlock

With function: The first operation of keyless entry system or unlock operation by KOS unlocks the driver’s door only, and the second unlock operation within 2 seconds after that unlocks all doors.

Auto door unlock

Adjustment of the auto door unlock function

Disabled

Without function <M/T, CVT> (initial condition)

Always (P pos)

With function: Operates when the shift lever or the selector lever is moved to the P position. <CVT>

Always(Lock pos)

With function: Operates when the ignition switch is moved to the LOCK (OFF) position. <M/T, CVT>

Timer lock timer

Timer lock period adjustment

30 sec

30 seconds (initial condition)

60 sec

60 seconds

120 sec

120 seconds

180 sec

180 seconds

Deadlock Button Operation

Adjustment of the dead lock system setting procedure <Vehicles with dead lock system>

Twice

Operate the lock switch of the keyless entry system or KOS twice.(initial condition)

Once

Operate the lock switch of the keyless entry system or KOS once.

Sensitivity for security sensor

Sensitivity level setting of security alarm sensor <Vehicles with security alarm sensor>

Level 1

100% sensitivity of security alarm sensor (initial condition)

Level 2

90% sensitivity of security alarm sensor

Level 3

80% sensitivity of security alarm sensor

Level 4

70% sensitivity of security alarm sensor

Duration pre-alarm

Adjustment of pre-alarm continue time <Vehicles for South Africa>

10 sec

10 seconds (Initial condition)

6 sec

6 seconds

Alarm

Enables/disables security alarm <Except vehicles for South Africa>

Disable

Without function (Initial condition)

Enable

With function

Multi mode

Multi-mode keyless entry function customisation <Vehicles with electric retractable remote controlled door mirrors>

Disable

No function

D/M: O&C

Door mirror fold/unfold operation only (initial condition)

KOS key detect out from window

With/without KOS key exterior detection function <Vehicles with KOS>

Disable

No function (initial condition)

Enable

With function

KOS feature

KOS function adjustment <Vehicles with KOS>

Both enable

All KOS functions are enabled (initial condition).

Door Entry enable

Only door entry function is enabled.

ENG strt enable

Only engine starting function is enabled.

Both disabled

All KOS functions are disabled.